|
Product Details:
Contact Now
Chat Now
|
| Material: | Wire Wound Resistor | Power Rating: | 20W |
|---|---|---|---|
| Resistance Range: | Above 2kr | Resistive Element: | 5*51 Grooved Rods |
| Lead Length: | 25mm | Size: | 13*13*64mm |
| Highlight: | Cement Fixed Resistors SQP,Cement Fixed Resistors 20W,2kr Wire Wound Resistor |
||
Cement Fixed Resistors SQP 20W Above 2kr
Introduction
| 1. Low noise and good heat dissipation | ||
| 2. It has good insulation strength when used on circuit boards | ||
| 3. It has strong overload capacity for a short period of time and exhibits minimal resistance variation | ||
| 4. Using an oxidized metal film instead of wire winding can produce high-impedance resistors | ||
| 5. Excellent heat resistance, with a linear change in resistance-temperature coefficient | ||
![]()
| Power | Size(mm) | Adjustable Dummy Load | |||||
| L | H | W | I | d | SQP | SQP | |
| 1W | 14 | 7 | 7 | 20 | 0.5 | 0.1Ω~100Ω | 100Ω~100K |
| 2W | 18 | 7 | 7 | 20 | 0.5 | 0.1Ω~100Ω | 100Ω~100K |
| 3W | 22 | 8 | 8 | 20 | 0.6 | 0.1Ω~200Ω | 200Ω~100K |
| 5W | 22 | 9.5 | 9.5 | 22 | 0.6 | 0.1Ω~500Ω | 500Ω~100K |
| 7W | 35 | 9.5 | 9.5 | 22 | 0.7 | 0.1Ω~1K | 1K~100K |
| 10W | 48 | 9.5 | 9.5 | 25 | 0.7 | 0.5Ω~1K | 1K~100K |
| 15W | 48 | 13 | 13 | 25 | 0.7 | 1Ω~1K | 1K~100K |
| 20W | 63 | 13 | 13 | 30 | 0.8 | 1Ω~2K | 2K~100K |
| 30W | 75 | 19 | 19 | 35 | 0.8 | 0.1Ω~2K | 2K~100K |
| 50W | 90 | 19 | 19 | 35 | 0.8 | 0.1Ω~3K | 3K~100K |
Contact Person: Mr. Jim
Tel: 15361036926