|
Product Details:
Contact Now
Chat Now
|
| Power: | 1/6W | Shape: | Cylinder |
|---|---|---|---|
| Installation: | Leadless | Operating Temperature: | -55 ~155℃ |
| Temperature Coefficient: | From 10 Ppm To 300ppm | Transport Package: | Carton |
| Max. Operating Voltage: | 200V (0204), 300V (0207) | Specification: | Refer To Datasheet |
| Highlight: | 390ohm Carbon Film Resistor,5m Carbon Film Resistor,1/6 Watt SMD Resistor |
||
High Quality 390Ω 5m Carbon Film Melf Resistor 5% 1/6 Watt
Product Details
The single impulse graph is the result of the impulse of rectangular shape applied.The limit of acceptance was a shift in resistance of less than 1% from the initial value.The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
Introduction
| 1. Excellent overall stability | |
| 2. Special carbon film technology | |
| 3. Excellect overall stability | |
| 4. High power rating up to 1Watts | |
| 5. Suitable for automatic SMD assembly systems |
Shape Dimensions And Structure
![]()
| No. | Components |
| A | Epoxy resin painting |
| B | Color code |
| C | High stability electric conduction film |
| D | Cutline |
| E | Ceramic core |
| F | Caps |
![]()
| Specs | Dmensions(mm) | ||||
| A±1.5 | B±1 | C±0.5 | W±0.5 | T±0.5 | |
| 0204 | 178.50 | 60.00 | 13.00 | 9.00 | 12.50 |
| 0207 | 178.50 | 60.00 | 13.00 | 13.00 | 15.50 |
| 0309 | 330.00 | 100.00 | 13.00 | 17.00 | 19.00 |
| 0411 | 330.00 | 100.00 | 13.00 | 25.00 | 19.00 |
Performance Test
| Test Item | Test Condition | Performance |
| Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100℃,calculate per ℃ resistance value change rate | △R≤(1%Ro+0.05Ω) |
| Short time overload | Rated voltage X 2.5 times, 5s but not to exceed maximum overload voltage | △R≤(2%Ro+0.05Ω) |
| Pulse overload | At 4 X rated voltage or Max.pulse overload voltage(get the lower)cycle 10000±200 times(1 second on,25 seconds off) | △R≤(1%Ro+0.05Ω) |
| Resistance to soldering heat | Immersion in 350±10℃ tin stove for 2-3 seconds,After test leave for 3h | The area of soldering is over 95% |
| Solder ability | Immerse in tin fumace for 2±0.5 seconds(lead-free tin layer 260℃±5℃,lead-containing tin layer 235℃±5℃ | △R≤(5%Ro+0.05Ω) |
| Temperature cycling | At -55℃ for 30min,then at +25℃ for 10~15 min, then at +125℃ for 30min,then at +25℃ for 10~15 min,total 5 cycles | △R≤(5%Ro+0.05Ω) |
| Load life in humidity | Overload rated voltage or Max.working voltage (get the lower) for 1000h (1.5h on and half-hours off) at the 40±2℃ and 90~95% relative humidity | △R≤(5%Ro+0.05Ω) |
| Load life in heat | Overload reted voltage or Max.working voltage(get the lower) for 1000h(1.5h on and half-hours off) at the 70±3℃ | No visible flame |
| Accidental overload | Respectively load AC voltage by 5/10/16 times rated power for 5 minutes | Fusing time is within 60s |
Contact Person: Mr. Jim
Tel: 15361036926