|
Product Details:
Contact Now
Chat Now
|
| Power: | 1/6W | Max. Peak Temperature (Tp Max): | Nichrome Wire |
|---|---|---|---|
| Applications: | 260°C | Specification: | 0102/0204/0207 |
| Min. Peak Temperature (Tp Min): | 235°C | Product Name: | MELF SMD Resistor |
| Rohs Compliance: | Yes | Tolerance: | ±5% |
| Highlight: | Durable MELF SMD Resistor,MELF SMD Resistor 390 Ohm,Thin Film Technology Resistors 1/6 Watt |
||
Durable 390 Ohm MELF resistor 5% 1/6 watt
Product Details
Metal Film resistor is Film resistor (Film Resistors) of a kind. It USES high temperature vacuum coating technology to tightly attach ni-cr or similar alloy to the surface of porcelain bar to form a skin film. After cutting and adjusting the resistance value to achieve the final demand of precision resistance value, and then add appropriate joint cutting, and coated with epoxy resin on its surface sealed protection. Because it is lead resistance, convenient manual installation and maintenance, used in most household appliances, communications, instrumentation.
Compared with carbon film resistance, this kind of resistance is small in size, low in noise, good in stability, but high in cost. It is often widely used as a precise and high stability resistor, and also widely used in various radio electronic equipment.resistors are designed to function according to ohmic lawa.This is basically true of resistors for frequencies up to 100kHz.At higher frequencies,there is an additional contribution to the impedance by an ideal resitor switched in series with a coil and both switched and the conductive path length.
Introduction
| 1. Thin film technology | |
| 2. Excellent overall stability | |
| 3. Sn termination on Ni barrier layer - Tight tolerance down to 10.1%. | |
| 4. Extremely low TCR down to 15 ppm/C — High power rating up to 1 Watts -SMD enabled structure. | |
| 5.Lead-free and RoHS compliant. | |
| 6.Operating temperature: -55°C to 275°C. | |
| 7.Application fields: Power supply, lighting, electrical instruments, etc. |
Shape Dimensions And Structure
![]()
| Model | Size description(mm) | ||||
| L | D1 | D2 | D3 Max | C Min | |
| 0207 |
Single cap 5.7±0.2 Double cap 6.0±0.2 |
1.7±0.1 |
Single cap 2.2±0.2 Double cap 2.6±0.2 |
0.10 |
Single cap 1.33 Double cap 1.33 |
| 0309 |
Single cap 8.5±0.2 Double cap 8.7±0.2 |
2.5±0.1 |
Single cap 3.2±0.2 Double cap 3.4±0.2 |
0.15 |
Single cap 1.4 Double cap 1.4 |
| 0410 |
Single cap 9.4±0.3 Double cap 10.0±0.5 |
3.0±0.1 |
Single cap 3.7±0.3 Double cap 4.2±0.3 |
0.20 |
Single cap 1.8 Double cap 1.8 |
| NO. | Name of the material | Material |
| 1 | Encapsulating material | Non-combustible coating |
| 2 | Color circle | Flame-retardant coating |
| 3 | Fuse | Alloy wire |
| 4 | Cap | Copper plating,tin palting of iron caps |
| 5 | Ceramic rod | Alumina ceramic body |
Contact Person: Mr. Jim
Tel: 15361036926