|
Product Details:
Contact Now
Chat Now
|
| Power: | 3W | Function For Resistance: | Protective Resistor |
|---|---|---|---|
| Type: | Metal Oxide Film Leadless Fixed Resistor | Operating Temperature: | -55 ~155℃ |
| Temperature Coefficient: | From 10 Ppm To 300ppm | Packaging: | Leadless |
| Typical Application: | Telecommunications, Medical Equipment, Measurement | Max. Operating Voltage: | 200V (0204), 300V (0207) |
| Specification: | Refer To Datasheet | ||
| Highlight: | 3W MELF SMD Resistor,0617 Precision Resistor,3W Precision Resistor |
||
Metal Film Melf Precision Resistor 0617 ±0.1% ±5ppm/°C High Stability Chips
Product Details
The single impulse graph is the result of the impulse of rectangular shape applied.The limit of acceptance was a shift in resistance of less than 1% from the initial value.The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
Introduction
| 1. Excellent overall stability | |
| 2. Tight tolerance down to 10.1% | |
| 3. Extremely low TCR down to 15 PPM/C - High power rating up to 1 Watts | |
| 4. High thermal stability and low surface temperature rise | |
| 5. Application fields: Telecommunication,Medical equipment,Measurement/Testing Equipment,Automotive,Industrial,LED Lamp. |
Shape Dimensions And Structure
![]()
| No. | Components |
| A | Epoxy resin painting |
| B | Color code |
| C | High stability electric conduction film |
| D | Cutline |
| E | Ceramic core |
| F | Caps |
Technical Specifications
| Rated dissipation 70℃ | Resistance range | Resistance tolerance | Temperature coefficient | Max open circuit Voltage(V) | Insulate Voltage(V) |
| 0.5W | 0.22-100 | 5(J) 10(K) | 350 | 200 | 250 |
| 1W | 200 | 250 | |||
| 1W | 250 | 250 | |||
| 1W | 300 | 300 | |||
| 2W | 350 | 350 | |||
| 2W | 350 | 350 | |||
| 2W | 350 | 350 | |||
| 3W | 350 | 350 |
Performance
| Test Item | Specifications | Test method |
| Short time overload | △R≤±(1%R+0.05Ω) |
2.5VR,5s |
| Soldeability | ≥95% | 235±5℃ 2±0.5s |
| Fusing characteristic | open circuit | 0.25W 12UR T<60s |
| Endurance at 70℃ | △R≤±(5%R+0.1Ω) | 70±2℃, VR (or Umax) 1000h |
| Rapid change of temperature | △R≤±(1%R+0.05Ω) | -55/125℃,30min 5cycles |
| Leaching | △R≤±(1%R+0.05Ω) | 350±10℃,3.5±0.5s |
| Climatic category | △R≤±(5%R+0.1Ω) | -10~65℃,humidity>90%,circular 240h |
| Vibrating | △R≤±(1%R+0.05Ω) | -10~500Hz,0.75mm or 98m/s²,6h |
Announcements
Humidity will make the electrode solder inferior,keep the temperature below 40℃,humidity below 70%.
Try not to connect multiple resistors in parallel or in line,but to use high voltage or high current.
Contact Person: Mr. Jim
Tel: 15361036926