|
Product Details:
Contact Now
Chat Now
|
| Type: | Thermal Resistor | Application: | Medical Apparatus And Instruments |
|---|---|---|---|
| Resistance Range: | 3r1-10m | Quantity: | Single Connection |
| Tolerances: | ±5% | Specification: | 1/4W |
| Origin: | Shenzhen | ||
| Highlight: | 1/4W Metal Oxide Film Resistor,Metal Oxide Film Resistor 3r1,10m Flame Proof Resistor |
||
1/4W MOF 3r1-10m Taping Type Metal Oxide Film Resistor
Product Details
Available in a wide range of resistance values and power ratings, with packaging options including bulk,tape and reel, they are suitable for both manual assembly and automated production lines.
Introduction
| 1. Power:1/4W | |
| 2. Wide Power Range: Available from 1/4W to 5W to suit various circuit requirements. | |
| 3. Linear Resistance Scale: Ensures consistent performance across the resistance range. | |
| 4. Customizable Options: Offers full customization, minor customization, and design-based options. |
Product mix
| NO. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-clad steel,without lead |
| 2 | End cap | Tinned iron |
| 3 | Carbon film | The conductive film is a metal oxide film |
| 4 | Ceramic rod | High-aluminum content ceramics |
| 5 | Colour code | Silicone resin coating |
| 6 | Finish paint | Non-combustible resin |
| Watts | Dimensions(mm) | ||||||
| L | P±1.0 | D | d±0.03 | h±1.0 | H±1.0 | Emax | |
| 1/4W/1/2WS | 6.0±0.5 | 6 | 2.3±0.3 | 0.4 | 5.0 | 14 | 3 |
| 1/2W/1WS | 9.0±0.5 | 6 | 3.2±0.3 | 0.5 | 5.0 | 18 | 3.5 |
| 1W/2WS | 11.0±1.0 | 6 | 4.0±0.5 | 0.6 | 5.0 | 20 | 3.5 |
| 2W/3WS | 15.0±1.0 | 6 | 5.0±0.5 | 0.7 | 5.0 | 25 | 3.5 |
| 3W/5WS | 17.0±1.0 | 6 | 6.0±0.5 | 0.7 | 5.0 | 30 | 3.5 |
Metal Oxide Film Fixed Resistors
1/4W 1/2W 1W 2W 3W 4W 5W 6W 7W 8W 10W 12W Metal Oxide Film Resistors are fixed form, axial resistors. They are made of ceramic rod that is coated with a thin film of metal oxides, such as tin oxide. Metal oxide film resistors must not be confused with metal oxide varistors, made of zinc oxide or silicon carbide.
Features
1. High wattage.
2. High stability, good reliability.
3. Flame proof painting.
4. Non-inductive type is available.
5. Ultra-low inductance less than 1uH.
Construction
The metal oxide film (MOF) is mostly produced with chemical deposition methods. Almost always a ceramic carrier is used as substrate. The deposition process involves the reaction of a pure metal with a gas at high temperature and at a low pressure. A very common metal oxide film is tin oxide. The film is established by heating the resistor body in a tin chloride vapor. Other metal oxide films have usually a different deposition process. Firstly a thin metal film is applied, which is afterwards reacted with oxygen. The desired composition is achieved by measuring the resistance of a test piece.
Contact Person: Mr. Jim
Tel: 15361036926