|
Product Details:
Contact Now
Chat Now
|
| Product Name: | Metal Oxide Film Resistor | Efficiency: | High |
|---|---|---|---|
| Dielectric With Standing Voltage: | 250V To 1000V | Shipping: | By DHL, FEDEX, TNT ,UPS,EMS Ect. |
| Material: | Metal Oxide Film | Working Voltage: | 800V |
| Power Rating: | 0.125W To 5W | Resistance: | 10R~1MR |
| Operatingtemperature: | -55°C To +155°C | Temperature Coefficient: | ±100 Ppm/°C |
| Precision: | High Precision | Color: | Yellow |
| Flammability Rating: | UL 94V-0 | Power: | 1/2W |
| Highlight: | Heat Resistant Metal Oxide Film Resistor,Metal Oxide Film Resistor 1/2W,220K High Precision Resistor |
||
Oxide film resistance ½W 220K ±5% T52 braid
Product Details
A metal oxide film resistor is a high‑quality fixed resistor. It is made by depositing a metal oxide film on a ceramic core.
It features high stability, good heat resistance and low noise. It is widely used in precision electronic circuits.
Introduction
| 1, High temperature resistance, excellent antioxidant properties, good heat dissipation, strong load capacity | |
| 2, Flame-retardant paint, featuring the safety characteristics of non-combustibility and insulation | |
| 3, The flame-retardant topcoat comes in a variety of colors, including grey, green, pink, etc. | |
| 4, Has strong resistance to instantaneous pulse voltage (current) | |
| 5, Can work stably in harsh environments | |
| 6, Accuracy range: 5% Operating temperature: -55℃ to 155℃ | |
| 7, Application fields: Charging stations, electricity meters, inverters, photovoltaic systems, etc. |
Product mix
| NO. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-clad steel,without lead |
| 2 | End cap | Tinned iron |
| 3 | Carbon film | The conductive film is a metal oxide film |
| 4 | Ceramic rod | High-aluminum content ceramics |
| 5 | Colour code | Silicone resin coating |
| 6 | Finish paint | Non-combustible resin |
| Power | L | D | H±2.0 | d±0.05 | Resistance range |
| 1/6W/1/8W/1/4WS | 3.2±0.3 | 1.8±0.5 | 28 | 0.38 | 1Ω~1M |
| 1/4W/1/2WS | 6.0±0.5 | 2.3±0.5 | 27 | 0.40 | 1Ω~1M |
| 1/2W/1WS | 9.0±1.0 | 3.2±0.5 | 26 | 0.50 | 1Ω~1M |
| 1W/2WS | 11.0±1.0 | 4.5±1.0 | 30 | 0.60 | 1Ω~1M |
| 2W/3WS | 15.0±1.0 | 5.0±1.0 | 30 | 0.65 | 1Ω~1M |
| 3W | 17.0±1.0 | 6.0±1.0 | 32 | 0.68 | 1Ω~500K |
| 5W | 24.0±1.0 | 8.0±1.0 | 36 | 0.75 | 12~500K |
1. Test Condition
A standard test condition is performed under ambient temperature 20±2ºC
Test can be performed under temperature 10 to 35ºC and R.H 45 to 85%
2. Short time overload
Apply 2.5 times of rated voltage (If the voltage exceeds the maximum
Overload voltage, the maximum overload voltage will be used as the rated
Voltage.) On the resistor for 5 seconds. Then measure the resistance value
after the resistor is released of load for 30 minutes. The resistance value
changed percent should be within ±1.00%+0.05 Ohm).
Contact Person: Mr. Jim
Tel: 15361036926