|
Product Details:
Contact Now
Chat Now
|
| Power: | 1/4W | Material: | Wire-wound Resistor |
|---|---|---|---|
| Type: | Trimming Potentiometer | Shape: | Refer To Pictures |
| Application: | Power Adapters, Car Navigation, Mobile Phones, LCD | Specification: | 1/2W 1W 2W 3W 5W 1WS 2WS 3WS 5WS |
| Highlight: | KNP Winding Resistor,1/4W Plug In Resistor,Plug In Resistor Low Noise |
||
1/4W KNP Wirewound Plug-in Winding Resistor
Product Details
The axial lead winding resistance is cut and bent into a vertical (upright) pin shape, and then incorporated into the tape/ribbon for use in high-speed mounting by an automatic assembly machine.
Introduction
| 1. Good heat-durability. low temperature coefficient, low noise, high load power | |
| 2. Surface is nonflammable,the 0.25W~30W | |
| 3. Resistance Range 0.1Ω~10KΩ | |
| 4. Suitable for PCB boards, power supplies, electrical appliances, instrumentation, etc. |
Product mix
![]()
| Power Rating | Resistance Range | Dmension | Max.working voltage | Max.overload voltage | Dielectric Withstanding Voltage | |||
| φD | L | H | φd±0.05 | |||||
| 1/6W/1/8W | 1~10MΩ | 1.8±0.2 | 3.2±0.5 | 28±2 | 0.40 | 200V | 400V | 300V |
| 1/4W | 1~10MΩ | 2.3±0.5 | 6.5±0.5 | 28±2 | 0.45 | 250V | 500V | 350V |
| 1/2WS | 1~10MΩ | 2.3±0.5 | 6.5±0.5 | 28±2 | 0.45 | 250V | 500V | 350V |
| 1/2W | 1~10MΩ | 3.2±0.5 | 9.0±0.5 | 26±2 | 0.50 | 350V | 700V | 400V |
| 1WS | 1~10MΩ | 3.2±0.5 | 9.0±0.5 | 26±2 | 0.50 | 350V | 700V | 400V |
| 1W | 1~10MΩ | 4.5±1.0 | 11.5±1.0 | 35±3 | 0.70 | 500V | 800V | 450V |
| 2WS | 1~10MΩ | 4.5±1.0 | 11.5±1.0 | 35±3 | 0.70 | 500V | 800V | 450V |
| 2W | 1~10MΩ | 5.0±1.0 | 15.5±1.0 | 33±3 | 0.70 | 500V | 1000V | 450V |
| 3WS | 1~10MΩ | 5.0±1.0 | 15.5±1.0 | 33±3 | 0.70 | 500V | 1000V | 450V |
| 3W | 1~10MΩ | 6.0±1.0 | 17.5±1.0 | 38±3 | 0.70 | 500V | 1000V | 500V |
Application
1. Power Supplies: Used in various types of power supplies to provide stable and controlled resistance under varying loads and environmental conditions.
2. Motor Drives: Found in motor drive circuits to limit current and manage voltage spikes, ensuring smooth operation and protection of electronic components.
3. Frequency Converters: Inverter circuits utilize these resistors to control current and voltage during frequency conversion processes.
4. Snubber Circuits: Used in snubber circuits to absorb energy from transient voltage spikes and prevent damage to sensitive electronic components.
5. Industrial Equipment: Commonly employed in industrial equipment such as welding machines, industrial automation systems, and high-power lighting systems.
6. Renewable Energy Systems: Used in inverters and converters of solar and wind energy systems to manage power conversion efficiently.
7. Medical Equipment: Found in power supplies and control circuits of medical equipment where reliability and precision are critical.
8. Telecommunications: In telecommunications equipment to stabilize power and maintain signal integrity.
Contact Person: Mr. Jim
Tel: 15361036926