|
Product Details:
Contact Now
Chat Now
|
| Product Name: | Winding Resistor | Operating Temperature: | -55°C To +350°C |
|---|---|---|---|
| Inductance: | Low Inductance Design | Application: | Motor Control, Power Supplies, Braking Systems |
| Type: | Electrical Component | Dimensions: | Varies By Model |
| Temperaturecoefficient: | ±50 Ppm/°C | ||
| Highlight: | 3WS Winding Resistor,Winding Resistor 1R5,Low Inductance Resistor Green |
||
3WS 1R5 ±5% Wirewound Resistor Green Series
Product Details
The core is made of ceramic or alumina rods. Nickel-chromium alloy wires and copper-nickel alloy wires are tightly wound around the core. Electrodes are welded at both ends. The outer layer is coated with high-temperature resistant insulating glaze or epoxy resin for encapsulation. For the surface mount type, it is made into a flat package, which is suitable for SMT welding.
Introduction
| 1. Resistant to high current, with extremely strong surge resistance, and its overload capacity is much better than that of thick-film and thin-film resistors. | |
| 2. High precision, low temperature drift, good stability, suitable for precise current limiting and power circuits | |
| 3. Accuracy range of ±5%. | |
| 4. Operating temperature: -55℃ to +275℃ | |
| 5. High temperature resistance, high reliability, and not prone to aging | |
| 6. Application fields: Power supply, adapters, lighting, small household appliances, etc. |
Product mix
| No. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-coated steel,without lead |
| 2 | Terminal | Iron |
| 3 | Ceramic matrix | Ceramic rods with high aluminum content |
| 4 | Coil wire | Alloy wire |
| 5 | Surface paint | Non-combustible resin |
| 6 | Color code | Silicone resin coating |
| Power | L | D | H±2.0 | d±0.05 | Resistance range |
| 1/4W/1/2WS | 6.0±0.5 | 2.3±0.5 | 27 | 0.38 | 0.22Ω-200Ω |
| 1/2W/1WS | 9.0±1.0 | 3.2±0.5 | 26 | 0.50 | 0.22Ω-470Ω |
| 1W/2WS | 11.0±1.0 | 4.5±1.0 | 30 | 0.60 | 0.22Ω-820Ω |
| 2W/3WS | 15.0±1.0 | 5.0±1.0 | 30 | 0.65 | 0.22Ω-1KQ |
| 3W |
17.0±1.0 |
6.0±1.0 | 32 | 0.68 | 0.22Ω-1kΩ |
| 5W | 24.0±1.0 | 8.0±1.0 | 36 | 0.75 | 0.22Ω-1KQ |
Specifications
Type:Wirewound Resistors
power:0.25W~30W
Resistance Range 0.1Ω~10KΩ
Resistance tolerance::±1% ,±2% ,±5% ,±10%.
Operating Temperature Range -50ºC~275ºC
Good heat durability. low temperature coefficient, low noise, high load power
Surface is nonflammable,the 0.25W~30W
coating is gay white and indicate the resistance value by
color ring; the 7W or over will indicate the resistance value by lettering and coats green
Applications: Suitable for PCB boards, power supplies, electrical appliances, instrumentation, etc.
Contact Person: Mr. Jim
Tel: 15361036926