|
Product Details:
Contact Now
Chat Now
|
| Productname: | Wire Wound Resistors | Power Rating: | 0.25W To 100W |
|---|---|---|---|
| Inductance: | Low Inductance | Mounting Type: | Through Hole / Surface Mount |
| Resistance Range: | 0.1 Ohm To 10 Mega Ohm | Insulation Resistance: | ≥100 MΩ |
| Material: | Metal Alloy / Wire Wound | Tolerance: | ±0.5% To ±5% |
| Applications: | Motor Control, Power Supplies, Braking Systems | Temperature Coefficient: | 20~50 Ppm/°C |
| Highlight: | Flame Retardant Wire Wound Resistors,KNP Low Noise Resistor,Low Noise Resistor 3W |
||
3W KNP winding resistance
Product Details
Resistors are the fundamental components in electronic circuits used to impede the flow of current. They follow Ohm's Law and their core parameters include resistance value, error range, rated power, and temperature coefficient. They can be classified into fixed, adjustable, and sensitive resistors based on their resistance characteristics, and are categorized by materials into types such as carbon film, metal film, and wire-wound.
Introduction
| 1, Good heat resistance, low noise, high load power, and long-lasting without damage. | |
| 2, Flame-retardant paint, featuring the safety characteristics of non-combustibility and insulation. | |
| 3, Suitable for high-temperature environments, with an accuracy range of ±5%. | |
| 4, Operating temperature: -55℃ to +275℃ | |
| 5, Has strong resistance to instantaneous pulse voltage (current) and lightning surge surges | |
| 6, Application fields: Power supply, adapters, lighting, small household appliances, etc. |
Product Mix
| No. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-coated steel,without lead |
| 2 | Terminal | Iron |
| 3 | Ceramic matrix | Ceramic rods with high aluminum content |
| 4 | Coil wire | Alloy wire |
| 5 | Surface paint | Non-combustible resin |
| 6 | Color code | Silicone resin coating |
| Power | L | D | H±2.0 | d±0.05 | Resistance range |
| 1/4W/1/2WS | 6.0±0.5 | 2.3±0.5 | 27 | 0.38 | 0.22Ω-200Ω |
| 1/2W/1WS | 9.0±1.0 | 3.2±0.5 | 26 | 0.50 | 0.22Ω-470Ω |
| 1W/2WS | 11.0±1.0 | 4.5±1.0 | 30 | 0.60 | 0.22Ω-820Ω |
| 2W/3WS | 15.0±1.0 | 5.0±1.0 | 30 | 0.65 | 0.22Ω-1KQ |
| 3W |
17.0±1.0 |
6.0±1.0 | 32 | 0.68 | 0.22Ω-1kΩ |
| 5W | 24.0±1.0 | 8.0±1.0 | 36 | 0.75 | 0.22Ω-1KQ |
Performance Test
| ITEM | SPECIFICATIONS | TEST METHODS |
| DC RESISTANCE | ALLOWED UNDER R RATE TOLERANCE |
|
| SHORT TIME OVER LOAD | ±(2%+0.05Ω) ±(2%+0.05Ω)LESS THAN |
5.5*3.16 5 PERMANENT RESISTANCE CHANGE AFTER THE APPLICATION OF A POTENTIAL OF 2.5 TIME RCWV FOR 5 SECONDS |
| DIELECTRIC WITHSTANDING VOLTAGE | NO EVIDENCE OF FLASHOO-VER MECHANICAL DAMAGE ARCTIN OR INSULATION BREAKDOWN |
5.7V, 60 RESISTORS SHALL BE CLAMPED IN V-BLOCK AND SHALL BE TEST AT SPECIFIED IN THE ABOVE LIST ROR 60 SECONDS |
| ADHESION OF SOLDERABILITY | 3/4 SURFACE OF TERMINAL COVERED BY SOLDER |
6.5 235 ±5ºC 3 ±0.5 (sec) |
Contact Person: Mr. Jim
Tel: 15361036926