|
Product Details:
Contact Now
Chat Now
|
| Body: | Aluminum Oxide Ceramics | Resistance Wire: | Nickel-chromium Or Iron-chromium-aluminum Wire |
|---|---|---|---|
| Tolerance: | ±1% To ±5% | Power Rating: | 0.25W To 5W |
| Temperature Resistance: | 150°C To 250°C | Resistance Range: | 0.1Ω To 1MΩ |
| Packing: | 500-5000pcs/roll | ||
| Highlight: | 0.25W Winding Resistor,3W Winding Resistor,10R Axial Lead Resistors |
||
0.25W-3W winding resistor with braid 10R(customizable)
Product Details
The axial lead winding resistance is cut and bent into a vertical (upright) pin shape, and then incorporated into the tape/ribbon for use in high-speed mounting by an automatic assembly machine.
Introduction
| 1. Power:0.25-3W | |
| 2. 10R(customizable) | |
| 3. The wire-wound resistor can withstand greater power compared to the ordinary carbon film resistor. | |
| 4. High temperature resistance,high power. | |
| 5. Application fields: Power supply, adapter, charger, frequency converter, lighting, household appliances, medical equipment. |
Product mix
| No. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-coated steel,without lead |
| 2 | Terminal | Iron |
| 3 | Ceramic matrix | Ceramic rods with high aluminum content |
| 4 | Coil wire | Alloy wire |
| 5 | Surface paint | Non-combustible resin |
| 6 | Color code | Silicone resin coating |
| Power | L | D | H±2.0 | d±0.05 | Resistance range |
| 1/4W/1/2WS | 6.0±0.5 | 2.3±0.5 | 27 | 0.38 | 0.22Ω-200Ω |
| 1/2W/1WS | 9.0±1.0 | 3.2±0.5 | 26 | 0.50 | 0.22Ω-470Ω |
| 1W/2WS | 11.0±1.0 | 4.5±1.0 | 30 | 0.60 | 0.22Ω-820Ω |
| 2W/3WS | 15.0±1.0 | 5.0±1.0 | 30 | 0.65 | 0.22Ω-1KQ |
Performance Test
| Test Item | Test Condition | Performance |
| Temperature Coefficient | Test the resistance value at nommal temperature and nommal temperature added 100°C, calculate per °C resistance value change rate. | ±100ppm/℃ |
| Short Time Overload | 2.5 x rated voltage or Max. overload voltage ( get the lower ) for 5 seconds. | ΔR ≤ ± (0.5%R₀+0.05Ω) |
| Pulse Overload | At 4x rated voltage or Max. pulse overload voltage (get the Lower) cycle10000+200 times (1 second on, 25 seconds off). | ΔR ≤ ± (1%R₀+0.05Ω) |
| Resistance to Soldering Heat | Immerge into the 350±10°C tin stove for 2~3 seconds. | ΔR ≤ ± (0.5%R₀+0.05Ω) |
| Solderability | Immerge into the 245±3°C tin stove for 2~3 seconds. | The soldering area is over 95% |
| Temperature Cycling | At-55°C for 30 min, then at +25°C for 10~15 min, then at +155°C for 30 min, then at +25°C for 10~15 min, total 5 cycles. | ΔR ≤ ± (0.5%R₀+0.05Ω) |
| Load Life in Humidity | Overload rated voltage or Max. working voltage (get the lower) for 1000 hours (1.5 hours on and half-hour of) at the 40±2°C and 90~95% relative humidity. | ΔR ≤ ± (2%R₀+0.05Ω) |
| Load Life in Heat | Overload rated voltage or Max. working voltage(get the lower) for 1000 hours (1.5 hours on and half-hour off) at the 70+2°C. | ΔR ≤ ± (2%R₀+0.05Ω) |
Contact Person: Mr. Jim
Tel: 15361036926