|
Product Details:
Contact Now
Chat Now
|
| Material: | Constant Copper Wire Resistor | Diameter: | 0.5, 0.6, 0.8, 1.0, 1.5, 2.0mm |
|---|---|---|---|
| Specification: | 1.2*10mm | The Lowest Resistance: | 3mΩ |
| Shape: | U Type | HS Code: | 8516800000 |
| Origin: | Shenzhen | ||
| Highlight: | Jumper 0 Ohm Resistor,0 Ohm Resistor U Type,Manganese Copper Shunt Resistor |
||
Jumper 0 Ohm Resistor Manganese Copper Shunt Resistor
Product Description
In some electronic measuring instruments, devices or products, there is often a need to measure the DC current in the circuit, so researchers have developed a variety of current sensing integrated circuits. It is an I/V converter that converts the measured current into a corresponding voltage, V = kI, where k is the proportionality constant. In addition, in some electronic products, the output current should be limited to prevent overcurrent caused by faults (partial short circuit of the load or short circuit of the output terminal, increase of the output voltage of the power supply, etc.) and cause greater loss. When an overcurrent condition is detected, it can be controlled to turn off the power or load switch, or to output with a limited current.
Introduction
| 1. Lower resistance,the least can be meet 0.005Ω | |
| 2. Operating ambient temperature:-55℃~+155℃ | |
| 3. Can be according to customers requirement to forming the special type | |
| 4. Resistance tolerance:±1%,±5%,±10% |
Product mix
| Test Item | Performance |
| Max.resistance value | 0.03Ω |
| Lead wire material | Tinned copper wire or tinned CP wire |
| Tensile strength | 0.34~1.40mm:20~28KG/mm² |
| Elongate rate | 0.34~1.40:≥22% |
| Flex fold character | Dia.≤0.6mm:≥250g 3 times;Dia.≥0.6mm:≥500g 3 times |
| Solder ability | Immerge into the 260±5℃ tin stove for 2~3 seconds,the soldering area is ove 95% |
| Resistance to soldering heat | The tin color wouldn't be changed 180℃ for 1 hour |
Performance Test
Test Item Test Condition Performance
Temperature coefficient ±100ppm
Resistance to soldering heat R≤±0.5%R0
Solerability The soldering area is over 95%
Temperature cycling R≤±0.5% R0
Load life in humidity R≤±2% R0
Load life in heat R≤±2% R0
Contact Person: Mr. Jim
Tel: 15361036926