|
Product Details:
Contact Now
Chat Now
|
| Product Name: | Carbon Film Resistor | Power Rating: | 0.125W To 2W |
|---|---|---|---|
| Resistance Tolerance: | ±5% ( J ) Or ±2% ( G ) | Package Type: | Axial Lead |
| Mouting Type: | Through The Hole | Resistance: | 10R 22R 47R 51R |
| Type: | Fixed Resistor | Material Technology: | Carbon Composition |
| Reliability: | High Stability And Reliability | Temperature Coefficient: | -55°C To 275°C |
| Tolerance: | ±5%, ±10% | Power: | 1/8W |
| Highlight: | 51R Resistor,Carbon Film Resistance 0.5W,910K Resistor with Braid |
||
Carbon Film Resistance ½W 910K ±5% T52 Braid
Product Details
Carbon film resistors are the most classic and commonly used thin-film fixed resistors, with the model identification of RT. They are one of the most cost-effective and widely used basic resistors in electronic circuits.
Introduction
| 1, Stable performance and high limit voltage. | |
| 2, Wide resistance range and low procurement cost | |
| 3, Small in size, high in thermal stability, and the resistance remains unchanged over the years. | |
| 4, Accuracy range: 5% | |
| 5, Operating temperature: -55°C to 275°C | |
| 6, Application fields: Small household appliances, inverter welding machines, power tools, etc. |
Product mix
| NO. | Material name | Material |
| 1 | Lead wire | Tinned copper wire or tinned copper-clad steel,without lead |
| 2 | End cap | Tinned iron |
| 3 | Carbon film | The conductive film layer is carbon membrane |
| 4 | Ceramic rod | High-aluminum content ceramics |
| 5 | Colour code | Silicone resin coating |
| 6 | Finish paint | Epoxy resin |
| Power | L | D | H±2.0 | d±0.05 | Resistance range |
| 1/6W/1/8W/1/4WS | 3.2±0.3 | 1.8±0.3 | 28 | 0.38 | 1Ω~10MΩ |
| 1/4W/1/2WS | 6.0±0.5 | 2.3±0.3 | 27 | 0.40 | 12~1MQ |
| 1/2W/1WS | 9.0±1.0 | 3.2±0.5 | 26 | 0.50 | 0.11Ω~1MQ |
| 1W/2WS | 11.0±1.0 | 4.5±0.5 | 30 | 0.60 | 0.1Ω~1MQ |
| 2W/3WS | 15.0±1.0 | 5.0±0.5 | 30 | 0.65 | 0.1Ω~1MQ |
| 3W | 17.0±1.0 | 6.0±0.5 | 32 | 0.70 | 0.1Ω~500KQ |
| 5W | 24.0±1.0 | 8.0±0.5 | 36 | 0.75 | 0.1Q~500KΩ |
The carbon film layer is formed through a high-temperature vacuum coating process. Hydrocarbon gases (such as methane and propane) are introduced into a vacuum chamber and thermally decomposed. The resulting carbon atoms are then deposited evenly onto the surface of the ceramic substrate, forming a thin, conductive carbon film. The thickness and resistivity of this film directly determine the basic resistance value of the component: thinner films correspond to higher resistance values.
Feature
Small size,
Low power,wide resistance range
Stable performance of high voltage, pulsing load
RoHS compliant, halogen free, lead free
Contact Person: Mr. Jim
Tel: 15361036926