Our metal oxide film resistor production line has been expanded and re-qualified, now covering a continuous power range from 0.125W to 5W with resistance values from 1Ω to 1MΩ. The update responds to a clear shift in buyer requirements: power electronics designers working on electric vehicle charging equipment, photovoltaic inverters, smart electricity meters and industrial power supplies are no longer accepting general-purpose carbon film parts in heat-exposed positions.
The new series is built on a high-alumina ceramic rod with a metal oxide film deposited directly onto the core, sealed under a non-combustible resin finish coat rated UL 94V-0. Compared with the previous generation, three parameters were tightened for export markets:
| Power Rating | Length L (mm) | Diameter D (mm) | Lead d (mm) | Resistance Range |
|---|---|---|---|---|
| 1/6W, 1/8W, 1/4WS | 3.2 ±0.3 | 1.8 ±0.5 | 0.38 | 1Ω - 1MΩ |
| 1/4W, 1/2WS | 6.0 ±0.5 | 2.3 ±0.5 | 0.40 | 1Ω - 1MΩ |
| 1/2W, 1WS | 9.0 ±1.0 | 3.2 ±0.5 | 0.50 | 1Ω - 1MΩ |
| 1W, 2WS | 11.0 ±1.0 | 4.5 ±1.0 | 0.60 | 1Ω - 1MΩ |
| 2W, 3WS | 15.0 ±1.0 | 5.0 ±1.0 | 0.65 | 1Ω - 1MΩ |
| 3W | 17.0 ±1.0 | 6.0 ±1.0 | 0.68 | 1Ω - 500KΩ |
| 5W | 24.0 ±1.0 | 8.0 ±1.0 | 0.75 | 12Ω - 500KΩ |
Lead wire is tinned copper or tinned copper-clad steel without lead content, caps are tinned iron, the colour code is silicone resin coated, and the finish paint is a non-combustible resin. This combination delivers the three characteristics buyers ask about most often in RFQs: strong resistance to instantaneous pulse voltage and current, stable operation in harsh environments, and a coating that will not propagate flame during a fault event.
Demand for flameproof, heat-resistant fixed resistors is tracking the build-out of charging infrastructure and distributed solar. Buyers in Europe and North America are also tightening incoming inspection, which favours suppliers who can document overload behaviour and temperature coefficient rather than quoting a price alone. The expanded series is available for sampling now, with custom tolerance down to ±2% on request.
Contact Person: Mr. Jim
Tel: 15361036926