The MELF SMD Resistor range has been extended with two families aimed at board assemblies that previously depended on axial leaded parts: the 0410 and 0411 high power cylindrical resistors rated up to 3W, and the 0207 fuse chip resistor series rated from 1/8W to 3W. Both families target smart electricity meters, electronic weighing terminals, industrial power supplies, lighting drivers and automotive electronics, where board density and automated assembly now decide landed cost.
The 0410 and 0411 parts combine an oxide film resistive element with the MELF metal electrode leadless face package. The resistive layer is formed by thermally oxidising a nickel-chromium alloy substrate, then laser trimming the film length to reach the target value. Metal electrodes are bonded directly to both ends of the ceramic body, removing axial leads while preserving a 3W rating and excellent heat conduction through the high-alumina core.
| Type | Length L (mm) | Diameter D (mm) | Termination K (mm) | Typical Rating |
|---|---|---|---|---|
| 0207 | 5.9 ±0.5 | 2.2 ±0.2 | 0.8 | 1/2W - 1W |
| 0309 | 8.5 ±0.5 | 3.0 ±0.3 | 1.7 | 1W - 2W |
| 0411 | 10.5 ±0.5 | 4.0 ±0.3 | 2.3 | 3W |
| 0515 | 14.5 ±0.5 | 4.5 ±0.3 | 2.3 | 3W and above |
Electrical highlights include thin film technology, tolerance down to ±0.1%, temperature coefficient as low as 15 ppm/°C, excellent overall stability, and lead-free RoHS compliant construction with Sn termination on an Ni barrier layer.
This part is simultaneously a wire-wound resistor and a fuse. It belongs to the fusible surface-mount resistor family and is commonly specified as a wire-wound fuse resistor or SMD wire-wound fuse. The construction uses an alumina ceramic body, an alloy wire fuse element, copper-plated tin-plated iron caps and a non-combustible flame-retardant coating with colour code marking.
Cylindrical MELF bodies self-centre during reflow, which reduces solder bridging on dense layouts and allows full pick-and-place processing without wave soldering. Both families ship on reel for automatic SMD lines. Monthly supply ability stands at 200 million pieces, standard delivery is 5 to 7 working days, MOQ starts at 1 piece for samples, and CE and RoHS documentation accompanies every shipment on T/T terms.
When comparing MELF SMD Resistor offers, three data points separate reliable suppliers from price-only quotes: the documented fuse characteristic under surge, the actual operating temperature ceiling, and the TCR figure at the stated tolerance. Samples of the 0410, 0411 and 0207 fuse series are available now for design verification.
Contact Person: Mr. Jim
Tel: 15361036926